Acceder

3. Presione "centro de cuenta" -> "Mis consultas" y revise el estado de sus consultas

Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.

Estoy de acuerdo con todos los términos y condiciones de UTSOURCE,Privacidad y términos legales
Agree Later Entregar

Estado de existencia: 153609

Mínimo:1

Precio :
US $34.97
Añadir al carrito de compra

Favorita

  • Marca: Waveshare
  • ≥1: US $34.97150 US $32.87321

UTSOURCE Oficial

Ofrecemos productos de alta calidad, servicios pensados en el cliente y garantía post-venta

  • image

    Tenemos productos de calidad que se ajustarán a sus necesidades.

  • image

    La cantidad mínima del pedido es de una pieza y el valor del pedido debes ser superior a 10.00$US

  • image

    Los envíos internacionales más baratos, comienzan en 2.00$US (para direcciones registradas)

  • image

    Garantía de calidad de 60 días en todos los productos

Una gran variedad en nuestro inventario, puede encontrar cualquier componente electrónico de las principales empresas del mundo

Alternate Text

Variedad de métodos de pago

Alternate Text

Variedad de opciones logísticas, rápidas y baratas

  • USA / Canada / Mexico Europe Australia / New Zealand Asia
  • image $ 20.00 $ 25.00 $ 22.00~ 25.00 $ 18.00~ 22.00
  • image $ 2.00 $ 4.00 $ 4.00 $ 4.00

Fedex gratis para pedidos superiores a $69.9/ $99.9

Correo postal gratis para pedidos superiores a $19.9

Utsource FBU service

Utsource es una plataforma online de componentes electrónicos de todo el mundo que reúne a muchos proveedores increíbles. Utsource ofrece un servicio FBU (Fulfillment by Utsource), un servicio integrado para usuarios SME (Small and medium enterprises). Características gran efectividad, muy rápido, seguro y conveniente.

  • Eficiencia alta
  • Velocidad alta
  • Seguridad
  • Conveniente
videoImg
videoImg
videoImg
videoImg
videoImg


STM32 development board designed for STM32F405R series, features the STM32F405RGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.

STM32F405RGT6 development board

Overview


Open405R-C is an STM32 development board designed for the STM32F405RGT6 microcontroller, consists of the mother board and the MCU core board Core405R.


The Open405R-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F2 series microcontrollers.




What's on the mother board


STM32F405RGT6 development board on board resource

  1. MCU core board connector: for easily connecting the Core405R

  2. UART3 interface: easily connects to RS232, USB TO 232, etc.

  3. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI

  4. I2S2/I2S3/I2C1: for connecting I2S peripherals, such as Audio module

  5. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.

  6. SPI1/SPI2 + AD/DA interface

    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.

    • SPI1 features AD/DA alternative function, supports connecting AD/DA module as well



  7. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.

  8. LCD interface: for connecting touch screen LCD

  9. ULPI interface: for connecting high-speed USB peripheral (the STM32F405R integrates USB HS controller without any PHY device)

  10. UART1 interface: easily connects to RS232, USB TO 232, etc.

  11. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently

  12. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently

  13. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.

  14. 5V DC jack

  15. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board

  16. MCU pins connector: VCC, GND, and all the I/O ports are accessible on expansion connectors for further expansion

  17. LEDs jumper

    • short the jumper to connect to default I/Os used in example code

    • open the jumper to connect to custom I/Os via jumper wires



  18. Joystick jumper

    • short the jumper to connect to default I/Os used in example code

    • open the jumper to connect to custom I/Os via jumper wires



  19. User key/Wake-Up button jumper

    • short the jumper to connect to default I/Os used in example code

    • open the jumper to connect to custom I/Os via jumper wires



  20. 5V power selection jumper: powered from Core 5V or 5V DC

  21. LEDs: convenient for indicating I/O status and/or program running state

  22. User key: convenient for I/O input and/or interact with running code

  23. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key

  24. Joystick: convenient for I/O input (five positions)


What's on the Core405R


STM32F405RGT6 development board on board resource

  1. STM32F405RGT6:the high performance STM32 MCU which features:

    • Core: Cortex-M4 32-bit RISC

    • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz

    • Operating Voltage: 1.8V-3.6V

    • Package: LQFP64

    • Memories: 1MB Flash, 192+4kB SRAM

    • MCU communication Interfaces:

      • 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN

      • 1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY

      • 1 x USB HS ULPI (external PHY required)



    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)

    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP



  2. AMS1117-3.3: 3.3V voltage regulator

  3. MIC2075-2: onboard USB power management device

  4. Power supply switch, powered from 5Vin or USB connection

  5. Boot mode selection, for configuring BOOT0 pin

  6. Power indicator

  7. VBUS LED

  8. Reset button

  9. 8M crystal

  10. 32.768K crystal, for internal RTC with calibration

  11. JTAG/SWD interface: for debugging/programming

  12. USB connector, used for establishing USB communication between PC and the STM32 development board

  13. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion

  14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG

  15. USB jumper

    • short the jumper when using USB

    • open the jumper to disconnect from related I/O port



  16. VBAT selection jumper

    • short the jumper to use system power supply

    • open the jumper to connect the VBAT to external power, such as battery





Photos



STM32 Development Board
Open405R-C development board

STM32 Development Board
Open405R-C development board

STM32 Development Board
Open405R-C development board back view

STM32 Development Board
Open405R-C mother board

STM32 MCU Core Board
MCU core board Core405R

STM32 MCU Core Board
MCU core board Core405R

STM32 Development Board
Connecting to various peripherals


Connecting to touch screen LCD

USB Device
Connecting to USB device through OTG cable

USB3300 USB HS Board
Connecting to USB3300 USB HS Board

UDA1380 Board
Connecting to UDA1380 Board

RS232 Board
Connecting to RS232 Board

RS485 Board
Connecting to RS485 Board

PL2303 USB UART Board mini
Connecting to USB UART Board

SN65HVD230 CAN Board
Connecting to CAN Board

8 Push Buttons
Connecting to 8 Push Buttons

5 IO Keypad
Connecting to 5 IO Keypad

AD Keypad
Connecting to AD Keypad

Analog Test Board
Test Board on the AD/DA port

FM24CLXX FRAM Board
Connecting to FRAM Board

I2C cascading x3
Multi I2C peripheral Module connected to the I2C bus

AT45DBXX DataFlash Board
Connecting to DataFlash Board

VS1003B MP3 Board
Connecting to VS1003B MP3 Board

NRF24L01 RF Board
Connecting to NRF24L01 RF Board

Micro SD Storage Board
Connecting to Micro SD Storage Board

Connecting to any accessory board
Connecting to any accessory board you need


 



Note:
The Open405R-C supports programming via STM32 UART bootloader, a USB TO UART accessory board is also provided in the package.
The Open405R-C does NOT integrate any debugging function, a debugger is required.




JTAG/SWD interfaces


The figure 1, and 2 show the header pinouts of JTAG/SWD interface



Figure 1. JTAG Header Pinout
JTAG Header Pinout

Figure 2. SWD Header Pinout
SWD Header Pinout




Development Resources




  • Related software (KEIL etc.)

  • Demo code (examples in C, μC/OS-II)

  • Schematic (PDF)

  • STM32 development documentations (Datasheet etc.)


Wiki:
www.utsource.net/wiki/Open405R-C


Comentarios More>>

  • -1

    All is the best. Delivery is very fast .

    PT2313L,LC7821

  • United States

    Very good!

    F10 LED 10MM White Round Head Blue Light(50pcs),F10 LED 10MM White Round Head Red Light(50pcs),F5 LED 5MM White Round Head Red Light(50pcs),F5 LED 5MM White Round Head Common Green Light(50pcs),F5 LED 5MM White Round Head Blue Light(50pcs),ULN2003,74LS164,TIP42

  • Portugal

    Thanks for your feedback!

    FSDH321,FSDL321

  • United States

    Today I have received my order.I would like to thank you for the service and swift sending.

Método de pago

Método de pago internacional

  • Paypal US $0.00
  • Credit Card US $0.00
  • Amex US $0.00
  • Wire Transfer charge US $15.00 banking fee.
  • Moneygram US $0.00
  • Western Union US $0.00

Método de pago europeo

  • Sofort US $0.00
  • Eps US $0.00
  • Sepa US $0.00
  • onlinebetalen US $0.00
  • Bancontact US $0.00
  • Mybank US $0.00
  • YandexMoney US $0.00
  • QIWI US $0.00
  • WebMoney US $0.00
  • Dotpay US $0.00
  • P24 US $0.00
  • Payu US $0.00
  • Turkish Credit Bank Card US $0.00

Método de pago americano/asiático

  • Boletol US $0.00
  • Itau US $0.00
  • OXXO US $0.00
  • Banamex US $0.00
  • Bancomer US $0.00
  • Santander US $0.00
  • Spei US $0.00
  • Paytm US $0.00

Embalaje

  • Paso1:Productos

  • Paso2:Ponerse en el tubo

  • Paso3:Embalaje antiestático

  • Paso4:Caja de embalaje

  • Paso5:Etiqueta del código de barras del transporte

Pagos globales

Logística global

footShip

Copyright © 2019 Power by UTSOURCE HOLDING COMPANY LIMITED